Maintenance Predictive Maintenance Preventive Maintenance Reliability

Musings on Maintenance And Mobility

Maintenance Technology | June 15, 2017

klausblacheBy Dr. Klaus M. Blache, Univ. of Tennessee, Reliability & Maintainability Center

What we do and how we do it have changed dramatically with regard to maintenance and its impact on reliability. Gone are the days when you could easily repair most things on your car and perform regular maintenance. Today, it’s all about computer sensors, algorithms, and data historians. As a result, in most cases, we take for granted that our transportation modes are adequately maintained and reliable. Let’s look at some snippets of what’s going in areas of reliability and maintenance (R&M) on cars, trains, planes, and ships.

Cars: Tesla’s plant in Fremont, CA (tesla.com, Palo Alto) is now the most advanced and talked about automotive factory in the world. The site was the former home of New United Motor Manufacturing Inc. (NUMMI), a joint venture of General Motors and Toyota (1984 to 2010). Based on my scan of recent Tesla job postings, maintenance technicians in Powertrain are expected to perform at a Journeyman Level on all machines in the assigned area and be responsible for preventive maintenance, troubleshooting/repair, clean lines, and escalation of assigned equipment. Individuals in these roles must be willing to tackle whatever maintenance challenge arises and to assist and learn from others in their areas of expertise. A sampling of the posted jobs seems to highlight the company’s interest in worker flexibility and high levels of employee engagement. This doesn’t mean maintenance technicians are expected to have all the answers regarding plant culture. Installing and sustaining an autonomous workforce may be more difficult than building autonomous vehicles.

Advances in technologies, approaches, and methods are helping to keep our various modes of transportation moving, as well as ensuring that they are reliable and safe.

Advances in technologies, approaches, and methods are helping to keep our various modes of transportation moving, as well as ensuring that they are reliable and safe.

Trains: Railways are considering using drones to help with security, initial track inspections, and predictive maintenance. Some already leverage them for safe, economical checking of switch-point heating systems. Other advanced-technology approaches include the use of: wheel-temperature detectors (infrared) to check brakes, wheel-profile monitors (lasers and optics) to assess wheel wear, and acoustic-detector systems (acoustic signatures) to identify wheel-bearing failure. Deutsche Bahn (DB) and Siemens are piloting predictive analytics to avoid failures and make vehicle maintenance recommendations. All diagnostic data is ultimately made available to maintenance personnel.

Planes: The 472 million-cubic-sq.-ft. Boeing aircraft plant in Everett, WA, is the largest building in the world by volume. A tour guide told me maintenance costs on new 787 Dreamliners produced there are 30% lower than for earlier models. These planes are also expected to have a 30-yr. life (versus 20 for metal planes). Built mostly from carbon/polymer resin (lighter than aluminum, tougher than steel) Dreamliners consume 20% less fuel than earlier Boeing planes. Maintenance on these technological marvels also requires expertise in repairing composite structures.

Ships: On the Hawaiian cruise ship “Pride of America,” I discussed maintenance and operations with the vessel’s chief engineer. Manned by a 927-member crew, this 81,000-ton, 921-ft., ship runs with 25-MW propulsion power and 50-MW auxiliary power. (Its maximum speed of 27.6 mph is fast enough to water ski). Typical maintenance activities include corrosion repair; cleaning drains, air ducts, and chiller and boiler tubes; venting engine fumes; and conducting on-board monitoring. The 54-person engineering staff is “hands on” and also does maintenance. Big maintenance is performed in port. Conditioned-based maintenance is often outsourced.  Spare parts can be a particular challenge, since the ship is usually moving from place to place.

Much goes into keeping cars, trains, planes, and ships moving. Next time you travel by any of these modes of transportation, think about what’s being done to ensure your reliable and safe journey. MT

Based in Knoxville, Klaus M. Blache is director of the Reliability & Maintainability Center at the Univ. of Tennessee, and a research professor in the College of Engineering. Contact him at kblache@utk.edu.

FEATURED VIDEO

ABOUT THE AUTHOR

Maintenance Technology

Sign up for insights, trends, & developments in
  • Machinery Solutions
  • Maintenance & Reliability Solutions
  • Energy Efficiency
Return to top